 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters THD 10 Series, 10 Watt Features Very high power density in DIP-24 package UL 60950-1 Wide 2:1 input range Very high efficiency up to 87% I/O isolation 1500V Input filter meets EN 55022, class A without ext. components Low ripple and noise Continuous short circuit protection Extended temp. range -40C to +85C 3-year product warranty The THD-10 series is a range of isolated high performance 10W DC/DC converters in a low profile DIL-24 package with standard industry pin-out. Other features of this product are built-in overvoltage protection and internal EMI-filter to meet EN 55022, class A. Full SMD-design with exclusive use of ceramic capacitors guarantees a high reliability and long product lifetime. Typical applications for these converters are industrial electronics, instrumentation, data communication systems and battery operated equipment with limited space available on the PCB. Models Order code THD 10-1210 THD 10-1211 THD 10-1212 THD 10-1222 THD 10-1223 THD 10-2409 THD 10-2410 THD 10-2411 THD 10-2412 THD 10-2422 THD 10-2423 THD 10-4809 THD 10-4810 THD 10-4811 THD 10-4812 THD 10-4822 THD 10-4823 http://www.tracopower.com 36 - 75 VDC (48 VDC nominal) 18 - 36 VDC (24 VDC nominal) 9 - 18 VDC (12 VDC nominal) Input voltage range Output voltage 3.3 VDC 5.1 VDC 12 VDC 12 VDC 15 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 12 VDC 15 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 12 VDC 15 VDC Output current max. 3`000 mA 2`000 mA 830 mA 415 mA 330 mA 3`000 mA 3`000 mA 2'000 mA 830 mA 415 mA 330 mA 3`000 mA 3`000 mA 2'000 mA 830 mA 415 mA 330 mA Efficiency typ. 82 % 83 % 87 % 87 % 86 % 83 % 85 % 87 % 87 % 88 % 87 % 83 % 85 % 87 % 87 % 88 % 87 % Page 1 of 3 DC/DC Converters THD 10 Series Input Specifications Input current (no load) 12 Vin models 40 mA typ. 24 Vin models 20 mA typ. 48 Vin models 10 mA typ. 12 Vin 24 Vin; 2.5.Vout 24 Vin; other output 48 Vin; 2.5.Vout 48 Vin; other output models models models models models 1000 mA typ. 380 mA typ. 480 mA typ. 190 mA typ. 240 mA typ. 10 Watt Input current (full load) Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) 12 Vin models 9 VDC / 8.5 VDC 24 Vin models 18 VDC / 17 VDC 48 Vin models 36 VDC / 34 VDC 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. 0.5 A max. EN 55022 level A, FCC part 15, level A 1.2 % - Input variation Vin min. to Vin max. - Load variation 10 - 100 % 1.0 % max. 1.2 % max. (1.5 % max. for 2.5 Vout models) 85 mVpk-pk max. 0.02 % /K >110 % of Iout max., constant current indefinite (automatic recovery) single output models 2'200 F max. 12 VDC output models 820 F max. - Operating - Case temperature - Storage -40 C to +85 C +95 C max. -55 C to +125 C 3.0 % / K above 60C 95 % rel H max. >1 Mio. h @ +25 C 1`500 VDC 1'200 pF typ >1`000 M Ohm 400 kHz typ. (pulse width modulation PWM) UL/cUL 60950-1, EN 60950-1, IEC 60950-1 compliance up to 60 VDC input voltage (SELV limit) CSA File No. 226037 Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 F, ground benign) Isolation voltage (60 sec.) Input/Output Isolation capacity Input/Output Isolation resistance Input/Output (500 VDC) Switching frequency (fixed) Safety standards Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters THD 10 Series Physical Specifications Case material Baseplate material Potting material Weight Soldering temperature steel, nickel plated non conductive FR4 silicon rubber TES (UL94V-0 rated) 17.3 g (0.61 oz) max. 265 C / 10 sec. 10 Watt Outline Dimensions 4.5 (0.18) 2.54 (0.10) Pin-Out Pin 23 22 Bottom view 2 3 Single -Vin (GND) -Vin (GND) No pin. No con. +Vout -Vout +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) Common -Vout +Vout Common +Vin (Vcc) +Vin (Vcc) 2 3 9 11 14 16 22 23 5.08 15.24 (0.60) 31.8 (1.25) 22.86 (0.90) (0.20) 16 14 2.5 4.1 10.2 (0.10) (0.16) (0.40) 9 11 Insulated Baseplate 15.24 (0.60) 20.3 (0.80) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Pin pitch tolerances 0.35 (0.014) Specifications can be changed any time without notice. Rev. 03/08 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3 |
Price & Availability of THD10-1210
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |